How to scrap the FPV battery?

source:other news release time:2023-02-22 Hits:0 Popular:Lithium-ion battery wholesale

　　 LiFePO4 battery pack (87).jpg

　　If there is the following situations, it means that your battery has already had problems, and it is recommended to deal with it properly.

　　Appearance judgment: significant swelling, damage, leakage, deformation;

　　Voltage judgment: battery voltage ≥4.27, (non -high -voltage formula) or below 2.75V;

　　Internal resistance judgment: endless battery resistance (not tested), or more than twice the initial internal resistance;

　　Capacity judgment: The capacity of two consecutive discharge is less than 70%of the nominal capacity;

　　The following is the processing method of FPV scrap battery:

　　1. Configure according to the proportion of salt water at 1:20, use wide -mouth containers (such as turning baskets, iron barrels, etc.), placed in the open outdoor (not easy to ignite and explosive items around), soake the battery in salt water for 2 hours for 2 hours for 2 hours , You must not exceed 3 groups at a time;

　　2. The wreckage after soaking is removed with fire tongs. After confirming that there is no voltage or no longer fever, it can be treated with general solid waste;

　　3. Under the condition of conditions permit, you can also contact the manufacturer to assist in handling;

Read recommendations:

lithium deep cycle marine battery company

solar energy storage batteries

60V 48Ah LiFePO4 Battery for Two-Wheeler E-Mobility

"temperature control" in lithium battery production technology?lithium golf cart batteries Production

Factors affecting high -power battery discharge performance.lifepo4 solar battery manufacturer