source:other news
release time:2023-07-03
Hits:0
Popular:
When the corresponding indicator icon (yellow) on the combination instrument is lit or when the surplus of the instrument is less than equal to 25%, the pure new energy vehicle must be charged at this time. (Note: The charging temperature requires 0 ℃ -55 ℃, the discharge temperature requires minus 20 ℃ -60 ℃)
The specific operation steps are as follows:
1. The vehicle should be parked in the room that is far from the flammable and explosive items.
2. Check the coolant to confirm whether the liquid level is normal. Check the charging pile socket to ensure safe and reliable.
3. When charging, first insert the power supply end of the "AC charging cable"; then, pull up the unlocking switch on the left side of the driver's seat up, open the charging port cover, and insert the "AC charging cable" vehicle end.
4. When the icon (red) on the combination instrument is lit, it means that the charging link device has been connected normally. When the corresponding icon (yellow) on the combination instrument is lit, it means that the new energy vehicle battery has begun to charge.
5. After the corresponding icon (yellow) is extinguished, it means that the power battery has been full. Please remove the "AC charging cable" vehicle end, then remove the "AC charging line" power supply section, turn off the charging port, and sort out the communication. Charging Cable.
Related precautions:
1. In the case of normal functions of the automatic starting temperature of the vehicle, in order to shorten the charging time, it is not recommended to use vehicle electric equipment during the vehicle charging process.
2. Charging at low temperature, the air conditioner will heat the battery as normal.
3. If you encounter a failure during the charging process of the battery of the new energy vehicle, please seek professionals for processing. Do not try to repair it without permission
Read recommendations:
51.2V Modular Stacking Rack Mount Energy Storage System
Why does the lithium iron phosphate battery be swollen?
Lithium battery development process.48v lithium golf cart battery
Last article:Increase in market share of lithium iron phosphate battery in new energy vehicles.dual purpose marine battery
Next article:New Energy Battery Group.whole house solar generator
related suggestion
solar power storage direct sales
2023-03-20lithium golf cart batteries Factory
2023-04-07lithium trolling motor battery Factory
2023-03-20lithium trolling motor battery Processor
2023-03-20solar energy storage batteries Processor
2023-03-20solar power station company
2023-04-07solar generator for camping
2023-05-0824 volt marine battery
2023-05-08trolling motor battery
2023-05-08deep cell marine battery
2023-05-08solar generator amazon
2023-05-0812v 100ah lithium ion battery
2023-05-08LiFePo4 Battery Pack 12V 350Ah
2022-09-1918650 Na-ion Sodium-ion Battery 3.1V 1300mAh 1500mAh 3000 Cycles
2023-08-02Smart Home Device Lipo Battery Cell Pack 3.7V
2023-02-1451.2V Modular Stacking Rack Mount Energy Storage System
2023-07-04LiFePo4 Battery Pack 12V 200Ah for Ship Boat
2023-02-14What are the technical requirements for the main parameters of soft pack lithium batteries?solar generator for home
2023-08-25What are the characteristics of Lithium iron phosphate power battery?best solar generator for home backup
2023-08-01Do you want to use the newly purchased lithium battery after activation?
2022-11-09Portable Power Station vs. Solar Generators: The Differences
2022-09-05Parallel equalization charging method for lithium battery packs.lithium golf cart batteries
2023-10-10Low -temperature lithium polymer battery has the following characteristics
2023-02-10Navigation model battery introduction.lithium marine batteries maker
2023-03-31What are the methods of recycling lithium batteries?
2022-10-22Requirements to the performance of lithium battery protection board IC
2023-02-17Nickel -hydride battery charging method.12v 100ah lithium ion battery
2023-03-15