40135 8S1P 20Ah 25.6V robot lithium battery pack

The 40135 8S1P 20Ah is a robot lithium battery pack intended for service robots and automated equipment. System selection should confirm the equipment voltage, continuous and peak load, installation space, and required certifications.

The confirmed core ratings are 25.6V, 20Ah, 512Wh. Electrical limits include maximum charge voltage 29.2V; discharge cut-off voltage 20V; maximum charge current 15A; continuous discharge current 15A; peak discharge current 20A. Use the final approved specification for charger and protection settings.

Use a charger and protection strategy matched to the battery chemistry, voltage, and current limits. For this model, the relevant limits are maximum charge voltage 29.2V; discharge cut-off voltage 20V; maximum charge current 15A; continuous discharge current 15A; peak discharge current 20A. Verify connector polarity, cable sizing, fuse selection, and BMS communication before commissioning.

The confirmed physical and service information is cycle life: ≥4000; charge temperature: 0~60°C; discharge temperature: -20~+60°C; dimensions: 110×186×156mm; weight: 4.2kg. Allow adequate ventilation, mechanical support, service clearance, and protection appropriate to the operating environment.

Yes. Hysincere can evaluate connector, wiring, enclosure, BMS, communication, label, and packaging requirements. Current integration information is communication: RS485. Final feasibility and specifications are confirmed through engineering review.