Hysincere 36V LiFePO4 batteries use a 38.4V nominal platform for deep-cycle lead-acid replacement. The published range includes a 52Ah Bluetooth model and a 67Ah self-heating model; check the charger, load, case size and terminals before replacement.
38.4V 67Ah Self-Heating LiFePO4 Battery
The published LF3867N-BJ provides 2572Wh rated energy, 50A continuous discharge and IP65 protection. Its self-heating function supports charging below 0°C; confirm the charger and load against the exact model before installation.
A 36V LiFePO4 battery replacement starts with the full system, not voltage alone. Compare the published LF3852N-B or LF3867N-BJ data with the charger, load, enclosure and wiring before replacing a deep-cycle lead-acid bank.
Both published models use a 38.4V nominal LiFePO4 platform. The FAQ below gives the common 43.8V charging reference; still confirm the exact battery data and charger configuration before use.
Both published 36V models are listed with 50A continuous discharge. Compare the equipment’s continuous and surge load, then confirm the fuse, cable, connectors and protection settings for the selected model.
The 52Ah model stores 1996.8Wh and adds Bluetooth monitoring. The 67Ah model stores about 2572Wh and adds self-heating for low-temperature charging. Use the battery runtime guide before choosing capacity.
Confirm dimensions, terminal position, polarity, cable routing and service clearance in the actual battery compartment. For parallel banks, confirm the exact model and batch support the planned arrangement.
Contact Us
Learn about 38.4V nominal voltage, available capacities, charger requirements, lead-acid replacement and parallel expansion for 36V LiFePO4 battery systems.
