How should I choose between a pouch cell and a cylindrical-cell pack?

Choose according to enclosure shape and mechanical protection. A pouch cell often suits thin or irregular spaces but needs swelling allowance and protection from compression or puncture. Cylindrical cells have a more defined structure but require sufficient thickness, holders and wiring space.

How can runtime be estimated for a smart-home device?

Calculate average current from the duty cycle. Multiply current in standby, sensing, wireless transmission, display and actuator modes by the time spent in each mode, sum the results and divide by the full cycle time. Required capacity is approximately average current multiplied by target runtime, plus margin for temperature and aging.

What commonly causes a device to reset during wireless transmission?

Check peak current and voltage sag first. Record the current and duration during Wi-Fi, cellular transmission or motor actuation, then review battery resistance, protection-current limit, connector resistance and wire gauge. A high-capacity battery can still cause resets if its peak-current capability is insufficient.

How should the connector and leads be specified?

Define them against the device-side interface. Provide connector part number, positive and negative pin positions, lead length, wire gauge, cable-exit direction, installation bend radius and keying requirements. A photo alone is not sufficient without a polarity diagram.

What should be checked when charging is built into the device?

Check the charging IC and maximum charge voltage first. Also verify pre-charge, constant-current and constant-voltage settings, temperature sensing, charge termination, USB or adapter input and whether the battery protection circuit conflicts with the device’s charging logic.

Consumer Batteries

Smart Home Battery

Compact pouch and cylindrical-cell batteries for connected devices and smart-home equipment.

Products

3.6–3.7V

Nominal voltage

120mAh–10Ah

Capacity range

Home > Consumer Batteries > Smart Home Battery

Selection guide

Match the pack to enclosure space, runtime and load profile.

Compare the device's continuous and peak load, target runtime, available space and charging method. Cell format, connector, lead routing, protection strategy and service access should be confirmed before finalizing a smart-home battery pack.

Electrical fit

Confirm nominal voltage, usable capacity, continuous load, peak demand and charging limits.

Mechanical fit

Check enclosure space, mounting, terminals, connectors, cable routing and service access.

Project review

Share application, environment, quantity, compliance and integration requirements with engineering.

Products

Find a battery that fits your device

Compare capacity and cell format against the device’s space, power use and charging design.