Hysincere 24V lithium batteries use a 25.6V LiFePO4 platform for deep-cycle lead-acid replacement. The published range includes a 100Ah Bluetooth model and a 67Ah self-heating model; check the charger, load, case size and terminals before replacement.
25.6V 67Ah Self-Heating LiFePO4 Battery
The published LF2467N-BJ provides 1715Wh rated energy, 50A continuous discharge and IP65 protection. Its self-heating function supports charging below 0°C; confirm the charger and load against the exact model before installation.
A 24V lithium battery is not a drop-in replacement on voltage alone. Compare the published LF24100N-B or LF2467N-BJ data with the charger, load, enclosure and wiring before replacing a deep-cycle lead-acid bank.
Both published models use a 25.6V nominal LiFePO4 platform. The FAQ below gives the common 29.2V charging reference; still confirm the exact battery data and charger configuration before use.
LF2467N-BJ is published with 50A continuous discharge, while LF24100N-B is published with 100A. Compare continuous and surge load, then size the fuse, cable and connectors for the selected model.
The 67Ah model stores about 1715Wh and adds self-heating for low-temperature charging. The 100Ah model stores 2560Wh and adds Bluetooth monitoring. Use the battery runtime guide before choosing capacity.
Confirm dimensions, terminal position, polarity, cable routing and service clearance in the actual battery compartment. For series or parallel banks, confirm the exact model and batch support the planned arrangement.
Contact Us
Learn about 25.6V nominal voltage, capacity selection, charger compatibility, lead-acid replacement and series-parallel configurations for 24V LiFePO4 batteries.
