18650 2S2P 6500mAh 7.2V explosion-resistant lithium battery pack

The 18650 2S2P 6500mAh is a explosion-resistant lithium battery pack intended for industrial equipment requiring reinforced battery protection. System selection should confirm the equipment voltage, continuous and peak load, installation space, and required certifications.

The confirmed core ratings are 7.2V, 6500mAh, 46.8Wh. Electrical limits include maximum charge voltage 8.4V; discharge cut-off voltage 6V; maximum charge current 2.5A; continuous discharge current 2.5A; peak discharge current 6A. Use the final approved specification for charger and protection settings.

Use a charger and protection strategy matched to the battery chemistry, voltage, and current limits. For this model, the relevant limits are maximum charge voltage 8.4V; discharge cut-off voltage 6V; maximum charge current 2.5A; continuous discharge current 2.5A; peak discharge current 6A. Verify connector polarity, cable sizing, fuse selection, and BMS communication before commissioning.

The confirmed physical and service information is cycle life: ≥500; charge temperature: 0~45°C; discharge temperature: -20~+60°C; dimensions: 42×45×71mm; weight: 250g. Allow adequate ventilation, mechanical support, service clearance, and protection appropriate to the operating environment.

Yes. Hysincere can evaluate connector, wiring, enclosure, BMS, communication, label, and packaging requirements. Current integration information is connector, wiring, enclosure, and BMS options defined for the project. Final feasibility and specifications are confirmed through engineering review.